A place is incomplete without a door. If your garage door is too old slightly then 20 or 30 years, first consider this thing to replace it as soon as possible. The reason behind installing a new door is, it is quite comfortable to safe or to operate the new stuff because many essential places are available in the garage. If you are worried about the installation process of the garage door, then you need to consider the Liftmaster garage door opener first. Meanwhile, Liftmaster is providing the valuable service in your doorstep. Their main aim is to ensure safety and simplification in your life. Once you experience with a garage door opener, you will be a wonder with the best experience and convenient facility.
If you don’t even know how to install the garage door you need to follow step by step procedure for new door installation:
First released the tension
before start, your work, the first and foremost thing is to released the torsion spring. After that start with the adjustable locking pliers and wedging the pliers. Above the garage door, there is a header available with the pliers. However, the spring cone has four holes. You need to insert a steel rod into it and hold the rod tightly and lose it winding cone through set screws holding in one place.
Disconnect the door
After releasing the tension, you need to disconnect the existing door opener. Start with the top panel after that consider the downward panel and carefully remove the hinges. Disconnect the track which is connected to the panel with the help of unbolting and unscrewing from the door frame. However, if you plan is to fix an automatic door, first, you need to remove the opener’s track.
Installation of door panels
If you are installing a car garage door first place the reinforcement bar, which are available in the top panel. It is available for the door prevention. Use the drill to pilot the holes, just make sure that the bar is connected with centred holes. On the top panel, you need to attach the hinges. The manufacturer first pilot the holes with the help of a drill. In the bottom panel attach the axle support. Make sure that you have checked the top and bottom panel attachment. The last step is to place the panels with door holes.
Install the track while securing the hinges
you need to ensure the hinge first from inside the garage. You must place the wheeled axles to support the top and bottom axle from hinges. With the help of vertical track, piece installs the track so that it is easy to attach the brackets. In case you are a new install, check the instruction manual to follow the process. After connecting, check the wheels whether it lies appropriately. At the end attach the door cable.
Attach the spring track
To support the spring, you need to connect the spring assemble after that attach the track. However, the track is available in the vertical form. All of you need to connect the track from the first end to the second end. You can use the old ceiling support also.
Together the bolt tracks
the vertical track is going to attach with the horizontal track. Make sure that the door is appropriately entitled, don’t tighten it until you do not confirm whether it is assembled correctly. Smoothly lines up with firm bots. For fixing it hole the drill the track for perfect fitting.
Installing a spring
First, you need to locate the centre of the garage door and mark it, after that attach the spring support. Make sure that you are connecting the spring anchor thoroughly attach the spring locking cone
Tighten the small hole and springs
after installing all process, you need to entitle this thing that the spring is tightening manually if the door spring is loose you may face trouble.
The above is the process of installing a garage door, by following instructions. If you want best garage door then you need Liftmaster garage door opener. Why do you need to choose only the Liftmaster? They provide secure, exceeding expectation and innovative solution in your doorstep. So, forget worries and choose only Liftmaster.